SMACNA Annual Convention 2027

The SMACNA Annual Convention is the yearly meeting of the Sheet Metal and Air Conditioning Contractors' National Association, with education sessions and a product show. It draws HVAC and sheet metal contracting firm owners, executives, chapter staff and industry suppliers.

Official site

Checked November 2, 2026

Attendance

Not published

The organizer doesn't publish attendance or exhibitor numbers.

About SMACNA Annual Convention 2027

The SMACNA Annual Convention is the yearly meeting of the Sheet Metal and Air Conditioning Contractors' National Association. It brings HVAC and sheet metal contractors, chapter executives and supplier members together for education, a product show and networking. The next edition runs 24 to 27 October 2027 in San Diego County, California. The 2026 edition took place in Orlando from 25 to 28 October, with 74 companies and groups listed for its Product Show by our count.

  • 74

    Product Show exhibitors (our count)

    2026 ↗

  • 60

    Speaker profiles (our count)

    2026 ↗

  • 3,500

    SMACNA contractor member firms

    Source ↗

  • 15

    Chapters sponsoring the Product Show breakfast

    2026 ↗

Source: smacna.org

What happens at the SMACNA Annual Convention

The convention mixes education sessions, general sessions, a Product Show and social events over four days. The 2026 schedule at a glance shows how a typical edition runs.

In 2026, Monday held five rounds of education sessions on topics like prefabrication, safety, succession planning and AI. A Keynote Presentation and Awards Lunch followed at noon.

Tuesday was Product Show day. The 2026 floor map placed the show in the Floridian Ballroom from 8 a.m. to noon, with breakfast served on the floor.

Wednesday closed with a keynote, the President's Lunch and a Final Dinner with entertainment. SMACNA's Annual Business Meeting also took place that morning to elect board members.

Social events included the College of Fellows golf, clay shooting and pickleball outings. New in 2026 was a SMACNA Block Party at Universal CityWalk, with transportation included.

What's new for 2027

So far SMACNA has announced only the dates and region for 2027. The calendar places the convention in San Diego County, California, from 24 to 27 October.

Before then, SMACNA and the SMART union share a joint booth at AHR Expo 2027 in Chicago. See our page on AHR Expo 2027 for that show.

Other events for sheet metal contractors on this site include FABTECH 2027 and the International Roofing Expo 2027.

Who attends the SMACNA Annual Convention

The convention is aimed at SMACNA contractor members, chapter executives and Associate Members, the supplier companies in the association. SMACNA's 2026 program description names these groups.

SMACNA says it represents 3,500 contractor firms in the United States, Canada, Australia and Brazil. Its members work in HVAC, architectural, industrial and residential sheet metal and testing, adjusting and balancing.

Spouses and family members can register too, and the rate table has separate passes for them. ASHRAE and IFUS members get their own rates.

SMACNA doesn't publish an attendance figure for recent editions. Trade magazine ACHR News reported more than 1,400 people at the Maui convention it covered in December 2008.

Companies at the SMACNA Annual Convention 2026

The 2026 convention drew tool makers, HVAC manufacturers, insulation suppliers and construction software firms. Every company below is named on SMACNA's 2026 sponsor page or Product Show exhibitor list.

Sponsors (7)Milwaukee Tool, DEWALT, Federated Insurance and 4 more
Exhibitors (16)Titus, Procore, Johns Manville and 13 more
Speakers' companies (6)icon Mechanical, Intech Mechanical, The Hill Group and 3 more

Large brands included Milwaukee Tool, DEWALT, Autodesk, Trimble and Hilti. Software firms such as Procore, ServiceTitan and Bluebeam also took booths.

Contractor firms appeared mostly as speakers. They included icon Mechanical, Intech Mechanical, The Hill Group and Worcester Air Conditioning, per the 2026 speaker list.

Exhibitors at the SMACNA Annual Convention

The 2026 Product Show listed 74 exhibitors by our count of SMACNA's official exhibitor table. That count includes SMACNA's own booths and industry groups like the International Training Institute.

The show is a single morning on the Tuesday of convention week. The 2026 floor map shows booth numbers from 101 to 816 around a central breakfast and seating area.

SMACNA said 2026 sponsorships sold out. Companies interested in exhibiting at future conventions are asked to contact SMACNA's Product Show team by email.

Exhibitors who aren't SMACNA members paid the non-member exhibitor rate to register staff. It ran from $3,950 early bird to $4,450 late in 2026.

For 2026, the SMACNA HQ app doubled as the exhibitors' lead retrieval platform. See our guide to lead retrieval apps for how these tools compare.

Sponsors and partners at the SMACNA Annual Convention

SMACNA runs a tiered sponsor program, and its 2026 sponsor page named Milwaukee Tool and DEWALT as Elite Event Sponsors. They backed the closing night dinner and the happy hour.

Federated Insurance, Duro Dyne and C.L. Ward sponsored venues at the 2026 Block Party. Featured Event Sponsors were Federated Insurance, DEWALT, Price Industries and Stamped Fittings.

SMACNA chapters could sponsor the Product Show breakfast for $1,000 per chapter in 2026. Fifteen chapters took part, including SMACNA Greater Chicago and SMACNA Brasil.

SMACNA also lists six year-round Premier Partners on its convention pages. Teams planning sponsor packages can compare event sponsorship software.

The event's tech

Registration runs on Convention Management Resources (CMR), based on the registration links on the event's website (checked October 19, 2026).

Which platforms run B2B event registration →

SMACNA Annual Convention attendee list, exhibitor list and sponsor list

Official floor plan ↗

SMACNA publishes its exhibitor list and sponsor list on the convention site, but not an attendee list. The 2026 Product Show page lists every exhibitor with booth numbers.

The 2026 sponsor page lists sponsors by tier and the chapters that sponsored the breakfast. A Product Show floor map is also posted as a PDF.

Registered attendees use the SMACNA HQ app to build schedules and connect with each other. It doesn't make the attendee roster public.

For ways to research who's coming, see how to find who's attending an event and our list of event intelligence platforms.

See who's attending SMACNA Annual Convention

Organizers don't publish attendee lists. These event intelligence platforms show which companies and roles are likely to attend and help you book meetings. How to find who's attending

Speakers at the SMACNA Annual Convention 2027

SMACNA hasn't announced any speakers for the 2027 convention yet. In 2026 it issued a call for proposals in March and told selected speakers by late April.

SMACNA Annual Convention hasn't announced its 2027 speakers yet. Below is who spoke at past editions.

At the 2026 edition, comedian and author Dave Landau headlined the Keynote Presentation and Awards Lunch. Business futurist Jonathan Brill gave the Wednesday keynote, per the 2026 speaker list.

The 2026 list held 60 speaker profiles by our count. They came from member contractors, SMACNA staff, supplier firms and consultants.

Speakers included SMACNA President Todd Hill of Ventcon and Yael Meretyk Hanan, CEO of Pelles.ai. Joe Shryock of icon Mechanical and Andrea Steinbrenner of Exit Consulting Group also spoke.

Session proposals must fit 50 minutes and stay non-commercial, according to the 2026 call. SMACNA prefers sessions that include member contractors as presenters.

Who spoke at SMACNA Annual Convention 2026 (45)

Dates, venue and getting there

The 2027 SMACNA Annual Convention runs from 24 to 27 October 2027 in San Diego County, California. SMACNA's in-person programs calendar lists those dates but hasn't named the hotel on its public pages.

Future dates are set too. The 2028 convention runs 8 to 11 October at JW Marriott Desert Ridge in Phoenix, and 2029 heads to Nashville.

The 2026 edition used two connected Orlando resorts, the Signia by Hilton Bonnet Creek and the Waldorf Astoria Orlando. Both hotel blocks sold out before the event.

Tickets and registration

SMACNA hasn't opened 2027 registration yet. For 2026, registration opened on 14 April and ran through CMR's registration site.

The 2026 member rate was $2,800 early bird, $3,100 regular and $3,300 late. Non-members paid from $3,950, and member spouses from $1,150. We checked these rates in November 2026.

Registration covered all education sessions, most meals, the Product Show, the Block Party and the Final Dinner. Hotel, airfare and personal expenses weren't included.

Full refunds were possible until 4 September 2026, according to the cancellation policy. Later cancellations carried a 20% fee until 25 September, then no refund.

History of the SMACNA Annual Convention

The convention has run for decades. ACHR News called the 2010 edition SMACNA's 67th annual meeting, held at JW Marriott Desert Ridge in Phoenix.

Each convention installs SMACNA's new executive committee. At the 2025 Maui convention, Todd Hill of Ventcon became president.

A year earlier, SMACNA named Tom Martin of T.H. Martin as its 2024 to 2025 president at the convention. The 2026 edition in Orlando added the Universal CityWalk Block Party.

Frequently asked questions

When is the SMACNA Annual Convention 2027?
It runs from 24 to 27 October 2027 in San Diego County, California, per SMACNA's calendar. The hotel hasn't been named on SMACNA's public pages yet.
Where is the SMACNA Annual Convention held?
It moves each year. The 2026 edition was in Orlando, 2027 goes to San Diego County, and the 2028 edition goes to JW Marriott Desert Ridge in Phoenix.
How many people attend the SMACNA Annual Convention?
SMACNA doesn't publish an attendance figure for recent editions. ACHR News reported more than 1,400 people at the Maui convention it covered in 2008.
Who organizes SMACNA Annual Convention?
SMACNA Annual Convention is organized by SMACNA (Sheet Metal and Air Conditioning Contractors' National Association).
Where is the 2026 SMACNA Annual Convention?
It was held from 25 to 28 October 2026 in Orlando, Florida. The venues were the Signia by Hilton Bonnet Creek and Waldorf Astoria, per the 2026 convention page.
Who attends the SMACNA Annual Convention?
SMACNA contractor members, chapter executives and Associate Members attend, along with spouses and families. The 2026 program page describes it as SMACNA's largest gathering of members and partners.
Which companies exhibit at the SMACNA Annual Convention?
The 2026 Product Show listed 74 exhibitors by our count, including Milwaukee Tool, DEWALT, Procore, Autodesk and Greenheck. The official exhibitor list gives every booth number.
How much does the SMACNA Annual Convention cost?
In 2026 members paid from $2,800 and non-members from $3,950, per the registration page. 2027 rates haven't been published yet.
Who are the speakers at the SMACNA Annual Convention 2027?
SMACNA hasn't announced 2027 speakers yet. In 2026, Dave Landau and Jonathan Brill gave the keynotes, per the 2026 speaker list.
How do I sponsor or exhibit at the SMACNA Annual Convention?
SMACNA asks interested companies to email its Product Show and partnership teams, linked from the sponsor page. 2026 sponsorships sold out.
Is there a SMACNA Annual Convention attendee list?
No, SMACNA doesn't publish one. Exhibitors in 2026 captured leads through the SMACNA HQ app instead.