Manufacturing World Tokyo 2027

Manufacturing World Tokyo is a group of a dozen specialised manufacturing shows at Tokyo Big Sight, covering components, design and production management, factory DX, additive manufacturing and measurement. It draws engineers, production managers and buyers from Japanese manufacturers.

Official site

Checked October 19, 2026

Reported attendance

81,697

visits · 2026

Reported exhibitors

2,109 exhibitors · 2026

How these are counted ↓

About Manufacturing World Tokyo 2027

Manufacturing World Tokyo is a manufacturing trade show that RX Japan bills as Japan's largest. It groups a dozen specialist expos, from mechanical components and 3D printing to factory DX and physical AI. The 39th edition runs 16 to 18 June 2027 at Tokyo Big Sight. Engineers, production managers, buyers and IT staff from Japanese manufacturers make up the crowd. The 2026 show counted 81,697 visits and 2,109 exhibitors, including two co-located shows.

  • 12

    Specialist expos (2027)

    2027 ↗

  • 35,586

    Visits on busiest day (3 July)

    2026 ↗

  • 323

    Directory listings from outside Japan

    2026 ↗

  • 26

    Manufacturing World special sessions

    2026 ↗

  • 70,000

    Visitors (expected)

    2027 ↗

Source: manufacturing-world.jp

What happens at Manufacturing World Tokyo

Manufacturing World Tokyo is a show floor of 12 component expos under one badge. The organizer's about page lists the 2027 lineup.

The expos are Design Manufacturing Solutions, Mechanical Components and Technology, Medical Device Development, Factory Facilities and Equipment, and Additive Manufacturing. The rest are Measure/Test/Sensor, Manufacturing DX, Industrial ODM/EMS, Manufacturing Cyber Security, Smart Maintenance, Manufacturing × Physical AI and Manufacturing NEXT.

In 2026 the show filled East, West and South halls at Tokyo Big Sight. A free shuttle bus ran between the halls every five minutes. The same badge also covered the first Logistics Digital Transformation Expo and the first Digital Construction Expo Plus.

A free conference runs alongside the floor. The 2026 program listed 26 Manufacturing World special sessions, plus construction and logistics tracks. Exhibitor seminars ran in the halls. Free networking events ran in the VIP lounge area of East Hall 7.

RX Japan runs sister shows in other cities. Manufacturing World Nagoya runs in April 2027.

What's new for Manufacturing World Tokyo 2027

The 2027 show keeps the 12-expo lineup. The physical AI show returns as the Manufacturing × Physical AI Expo, and Manufacturing NEXT is back too.

RX Japan opened 2027 exhibitor applications on 6 July 2026. It expects about 70,000 visitors, a forecast rather than a result.

For other RX Japan shows at Tokyo Big Sight, see NEPCON Japan in February 2027.

Who attends Manufacturing World Tokyo

Most visitors are engineers and managers from manufacturers. The organizer's 2024 visitor demographics give shares by industry and job role.

Visitors by job role
  • Design/Development/R&D27%
  • Production Technology16%
  • Management8%
  • Purchasing/Procurement4%
  • Information System3%
  • Quality Control2%
  • Digital Transformation2%
  • Maintenance1%
  • Facility Management1%
  • Others36%

2024 · manufacturing-world.jp ↗

Visitors by industry sector
  • Machinery/Machine Parts17%
  • Electronics/Precision Equipment/IT Devices13%
  • Automobile/Automotive Parts9%
  • Materials5%
  • Metal & Resin Processing/Moulds5%
  • Semiconductor/Electronic Components5%
  • Medical/Healthcare Devices3%
  • Aerospace Equipment2%
  • Other Manufacturers16%
  • Others25%

2024 · manufacturing-world.jp ↗

Visits by day
  • Day 1 (1 July)20,534
  • Day 2 (2 July)25,577
  • Day 3 (3 July)35,586

Includes the co-located Logistics DX and Digital Construction expos. Excludes exhibitors and press.2026 · manufacturing-world.jp ↗

Exhibitor directory listings by country
  • Japan1,787
  • China96
  • South Korea84
  • Taiwan72
  • Thailand29
  • Vietnam28
  • United States7
  • India2

Our count of the official 2026 exhibitor directory (2,110 listings), 20 October 2026. Some companies have more than one listing.2026 · manufacturing-world.jp ↗

Exhibitor directory listings by product category
  • Processing Technology, Surface Treatment768
  • Mechanical Parts, Tubes, Fasteners, Springs365
  • Automation, Robotics311
  • Factory Facilities & Equipment279
  • Manufacturing Digital Transformation Solution273
  • Medical Device Development Technology239
  • AI Solution223
  • Measure, Test, Sensor208
  • CAD/CAM/CAE/PLM189
  • EMS/ODM/Outsourcing177

Our count of the official 2026 exhibitor directory's category filter, 20 October 2026. An exhibitor can pick several categories.2026 · manufacturing-world.jp ↗

Design, development and R&D staff were the largest job group at 27%. Production technology staff were 16%, and management was 8%. Purchasing was 4% and information systems 3%. The organizer counts 36% as other roles.

By industry, machinery and machine parts led at 17%. Electronics, precision equipment and IT devices were 13%. Automotive was 9%. Materials, metal and resin processing, and semiconductors were 5% each.

The organizer says Tokyo draws staff from the headquarters of big manufacturers. Its visitor profile names companies such as Hitachi, Mitsubishi Electric, Fujitsu, Canon, Honda and Nissan as visitor sources. It doesn't say which of them attended a given year.

The 2026 show counted 81,697 visits over three days. Each person counts once per day, and exhibitors and press aren't included. Friday 3 July was the busiest day with 35,586 visits. VIP registration is limited to managers and above.

Attendance and exhibitors by year

As the organizer reports them. What's counted varies between events, so compare with care.

EditionAttendanceExhibitors
2026

81,697visits over three days, incl. co-located Logistics DX and Digital Construction exposDaily visitors summed: a person is counted once per day, so repeat visits are included. Excludes exhibitors and press.manufacturing-world.jp ↗

2,109 exhibitorsmanufacturing-world.jp ↗

Companies exhibiting and speaking at Manufacturing World Tokyo 2026

Big Japanese manufacturers, global software firms and 3D printer makers all took part in 2026. Each company below is confirmed by the official 2026 exhibitor directory, the conference program or its own announcement.

Exhibitors (31)Mitsubishi Electric, Keyence, Omron and 28 more
Speakers' companies (12)Honda Motor, Nissan Motor, Yaskawa Electric and 9 more

Automation and components names included Mitsubishi Electric, Keyence, Omron, THK and Misumi. Software exhibitors included Autodesk, PTC, SAP and Salesforce. Measurement and 3D printing brands included Hexagon, FARO, Formlabs and 3D Systems.

Speakers came from Honda, Nissan, Yaskawa, Mitsubishi Heavy Industries and NVIDIA. The 2026 seminar program also listed Fujitsu, FANUC, Microsoft Japan and Stratasys Japan. Yamaha Motor also spoke on production engineering, MONOist reported.

Exhibitors at Manufacturing World Tokyo

The 2026 edition had 2,109 exhibitors across Manufacturing World and the two co-located shows. The organizer forecasts about 2,000 exhibitors for 2027, which is an expectation.

Most exhibitors are Japanese. Our count of the official 2026 directory found 1,787 of 2,110 listings from Japan. China had 96, South Korea 84 and Taiwan 72. Thailand and Vietnam followed with 29 and 28.

Processing technology and surface treatment was the biggest product category in that directory, with 768 listings. Mechanical parts, automation and robotics, and factory facilities came next.

To exhibit, you book a booth through the exhibit page. Booths are assigned first come, first served. Prices, the floor map and the contract form come in a free exhibiting info download that needs registration. We didn't register, so prices aren't shown here.

The organizer's Exhibitor Success team helps overseas firms with booth design, translating catchphrases into Japanese and visa documents. For lead capture, exhibitors can use Lead Manager by Emperia to scan visitor badge QR codes. See our guide to lead retrieval apps.

Sponsors and advertising at Manufacturing World Tokyo

Manufacturing World Tokyo sells advertising to exhibitors rather than running a named sponsor program. The advertising page lists ten options.

They include website and conference page banners, premium directory listings, visitor email ads and digital coupons. On site, there are floor map ads, hallway digital signage, entrance floor ads and hanging banners over booths.

Only exhibitors can buy advertising. Prices sit in a downloadable price list, and none are published openly. The conference also had at least one sponsored session in 2026. For tools to run a program like this, see event sponsorship software.

The event's tech

We couldn't identify a third-party registration platform on the event's website.

Which platforms run B2B event registration →

Manufacturing World Tokyo attendee list, exhibitor list and sponsor list

The official exhibitor list is the 2026 exhibitor directory on the show site. It covers every 2026 exhibitor with stand numbers, product categories and contact details. A 2027 directory isn't online yet.

There's no public sponsor list, since the show sells advertising rather than named sponsorships. The 2026 floor map lists exhibitors by name and stand.

RX Japan doesn't publish or sell an attendee list. Its participation policy says a visitor who scans their badge at a booth shares their details with that exhibitor. Reselling or sharing badges is banned.

Treat any offer to sell a Manufacturing World attendee list with caution. Our guide explains how to find who's attending an event. You can also compare event intelligence platforms.

See who's attending Manufacturing World Tokyo

Organizers don't publish attendee lists. These event intelligence platforms show which companies and roles are likely to attend and help you book meetings. How to find who's attending

Speakers at Manufacturing World Tokyo 2027

Manufacturing World Tokyo hasn't announced its 2027 speakers yet. The organizer's conference program page still shows the closed 2026 seminar program.

Manufacturing World Tokyo hasn't announced its 2027 speakers yet. Below is who spoke at past editions.

At the 2026 edition, senior leaders from carmakers, robot makers and tech firms took the stage. The organizer's 2026 floor guide listed featured sessions with each speaker's title and company.

Yasuo Kawai, Vice President and Head of Digital Unit at Honda Motor, opened day one in 2026. He spoke on Honda's data-driven AI strategy. Tomoki Eguchi, plant director at Nissan's Tochigi Plant, covered production changes in the auto industry.

Physical AI was a strong theme in 2026. Yumie Kubota of Yaskawa Electric spoke on AI robotics. Ken Arai of NVIDIA presented on the virtual factory.

Sessions are free, but some need pre-registration. The organizer's 2026 Day 1 report says many sessions started early and drew note-taking crowds. Most sessions ran in Japanese only, with an AI translation system available. The organizer doesn't publish a call for speakers.

Who spoke at Manufacturing World Tokyo 2026 (16)

  • Yasuo Kawai, Vice President, Head of Digital Unit, Honda Motor
  • Tomoki Eguchi, VP Plant Director, Tochigi Plant, Nissan Motor
  • Yumie Kubota, Executive Officer and General Manager, AI Robotics Dept., Yaskawa Electric
  • Youichi Tasaki, Senior Fellow, Head of Digital Innovation Headquarters, Mitsubishi Heavy Industries
  • Ken Arai, Senior Manager, Developer Relations, Robotics, NVIDIA
  • Yasumasa Yoshida, Group Manager, Engine and BEV Manufacturing Div., Tahara Plant, Toyota Motor
  • Hiroyuki Oiwa, Group Manager, Production Engineering Development Center, Toyota Industries
  • Katsuhiro Hiejima, Executive Officer, Creative Innovation Center Director, Nipro
  • Kazuyuki Kikuta, Director for Construction Automation, Ministry of Land, Infrastructure, Transport and Tourism
  • Tetsuya Kurebayashi, Managing Executive Officer, Digital Transformation Division, Obayashi
  • Atsushi Nomura, General Manager, Digital Transformation Strategy Planning Dept., Taisei
  • Tomoaki Harada, Chairman, Construction RX Consortium, and Senior Managing Officer, Shimizu, Shimizu
  • Tadatsugu Konoike, Director, Executive Vice President and Executive Officer, Konoike Transport
  • Masakazu Mikita, Senior Managing Executive Officer, General Manager of R&D Headquarters, PALTAC
  • Tomohiro Okuzumi, Secretary General, Japan Physical Internet Center
  • Masashi Onozuka, Partner, Roland Berger

Dates, venue and getting there

Manufacturing World Tokyo 2027 runs Wednesday 16 to Friday 18 June 2027. The venue is Tokyo Big Sight at 3-11-1 Ariake, Koto-ku, Tokyo.

Tokyo Big Sight Station on the Yurikamome line is about a 3-minute walk away. Kokusai-Tenjijo Station on the Rinkai Line is about 7 minutes on foot.

In 2026 the halls stayed open until 5 p.m. on the final day, per the organizer's Day 1 report. The 2027 opening hours aren't published yet.

Manufacturing World Tokyo 2026 hall layoutSimplified, not to scale. Based on the official plan ↗
East Halls 7 and 8 · Mechanical Components (venue 2) and Manufacturing NEXTEast Halls 1 to 3 · Mechanical Components (venue 1), Medical Device Development and Industrial ODM/EMSWest Halls 3 and 4 (4F) · Manufacturing DX (venue 1) and Digital Construction Expo PlusWest Halls 1 and 2 (1F) · Design Manufacturing Solutions, Additive Manufacturing, Manufacturing DX (venue 2), Cyber Security and Logistics DXSouth Halls 1 and 2 (1F) · Factory Facilities, Measure/Test/Sensor, Smart Maintenance and Physical AIConference Tower, special sessions · Conference Tower · ConferenceE7-8E1-3W3-4W1-2S1-2CONFERENCEShuttle busShuttle bus
  • Mechanical Components (venue 2) and Manufacturing NEXT
  • Mechanical Components (venue 1), Medical Device Development and Industrial ODM/EMS
  • Manufacturing DX (venue 1) and Digital Construction Expo Plus
  • Design Manufacturing Solutions, Additive Manufacturing, Manufacturing DX (venue 2), Cyber Security and Logistics DX
  • Factory Facilities, Measure/Test/Sensor, Smart Maintenance and Physical AI
  • Conference Tower

The 2026 layout at Tokyo Big Sight, as of 15 May 2026. The 2027 plan isn't published yet. Mechanical Components and Manufacturing DX each used two venues.

Tickets and registration for Manufacturing World Tokyo

Entry is free with a badge, and everyone must pre-register online. You can register up to 10 people at once, each with their own email address.

Badges become downloadable about three weeks before the show. You can print one at home or bring the 2D code and print it at the venue.

The show is for business visitors. Under RX's participation policy, only people aged 18 or over can pre-register. Minors must come with an adult, and each adult may bring up to five.

Managers and above can register as VIP visitors and use the VIP lounge. 2027 registration wasn't open when we checked in October 2026.

History of Manufacturing World Tokyo

The 2026 show was the 38th Manufacturing World Tokyo, MONOist reported. On the 2026 floor map, the Design Manufacturing Solutions Expo was also in its 38th edition, and Mechanical Components in its 31st.

In 2024 the show ran in Tokyo Big Sight's East and South halls. MONOist reported 69,717 visits and about 2,100 exhibitors, citing RX Japan.

The 2025 edition moved to Makuhari Messe in Chiba, MONOist reported. It returned to Tokyo Big Sight in 2026.

Two expos debuted in 2026, Manufacturing NEXT and the Physical AI Expo. Two co-located shows for logistics and construction DX also launched that year.

Frequently asked questions

When is Manufacturing World Tokyo 2027?
Manufacturing World Tokyo 2027 runs 16 to 18 June 2027 at Tokyo Big Sight. It's the 39th edition.
Where is Manufacturing World Tokyo held?
Manufacturing World Tokyo takes place in Tokyo, Japan, at Tokyo Big Sight. It's held every year.
How many people attend Manufacturing World Tokyo?
The 2026 show counted 81,697 visits over three days, including two co-located shows. That figure counts each person once per day and excludes exhibitors and press.
How many exhibitors are at Manufacturing World Tokyo?
The 2026 edition had 2,109 exhibitors including the co-located shows. The organizer expects about 2,000 for 2027.
Who organizes Manufacturing World Tokyo?
Manufacturing World Tokyo is organized by RX Japan.
What is Manufacturing World Tokyo?
It's a manufacturing trade show at Tokyo Big Sight that organizer RX Japan bills as Japan's largest. It combines 12 specialist expos covering components, design software, 3D printing, factory DX and physical AI.
Is there a Manufacturing World Tokyo 2026 exhibitor list?
Yes. The official 2026 exhibitor directory lists every exhibitor with stand numbers and product categories. The 2027 list isn't online yet.
Can I buy the Manufacturing World Tokyo attendee list?
No. RX Japan doesn't publish or sell an attendee list. Exhibitors get a visitor's details when that visitor's badge is scanned at their booth, under the participation policy.
Is Manufacturing World Tokyo free to attend?
Yes. Entry is free, but every visitor must pre-register for a badge. You must be 18 or over to register.
Who attends Manufacturing World Tokyo?
Mostly engineers and managers from manufacturers. In 2024, design and R&D staff were 27% of visitors and production technology staff 16%, per the organizer.
Which companies exhibited at Manufacturing World Tokyo 2026?
Exhibitors included Mitsubishi Electric, Keyence, Omron, Autodesk, PTC, SAP, Hexagon, FARO and Formlabs. All appear in the 2026 exhibitor directory.
How do I exhibit at Manufacturing World Tokyo?
Start on the exhibit page and request the free info pack with prices and the floor map. Booths go first come, first served.
Does Manufacturing World Tokyo offer sponsorship?
It sells advertising to exhibitors instead of named sponsorships. Options include banners, premium directory listings and on-site signage.