Embedded World 2027

embedded world is NürnbergMesse's annual exhibition and conference for embedded systems in Nuremberg. It draws engineers, developers and buyers from automotive, industrial, electronics and IoT companies.

Official site

Checked October 19, 2026

Reported attendance

35,962

visitors · 2026 · audited

Reported exhibitors

1,242 exhibitors · 2026

How these are counted ↓

About Embedded World 2027

embedded world is NürnbergMesse's annual exhibition and conference for embedded systems, from chips and modules to software, tools and displays. The 25th edition runs 16 to 18 March 2027 in Nuremberg, Germany. Admission is limited to industry professionals aged 18 and over. The 2026 edition drew 35,962 visitors and 1,242 exhibitors in FKM-certified figures.

Source: edge.sitecorecloud.io

What happens at embedded world

embedded world pairs a trade fair with two conferences and a free supporting program. The exhibition covers hardware, systems, distribution, services, tools and application software. Special areas cover electronic displays, embedded vision, M2M, safety and security, IC and IP design, and start-ups.

The embedded world Conference runs alongside the fair. The electronic displays Conference adds two days on industrial and automotive displays. In 2026 the two conferences had 2,141 participants and speakers from 47 countries, with 10 keynotes and 96 sessions.

Exhibitors present products in free exhibitor forums in Halls 3, 3A, 3C and 5. Expert panels run on the forum stages too.

The embedded award honors products in nine categories, from Artificial Intelligence to Tools. The 2026 winners included Ceva for Artificial Intelligence and Ambiq Micro for Tools. The program also includes a Student Day, the #women4ew networking event and guided tours.

What's new for embedded world 2027

2027 marks the 25th edition of embedded world in Nuremberg.

Hall 3C joins the layout for hardware, systems and services companies.

The trade fair ticket now includes a VGN KombiTicket for local public transport.

The show's new India edition adds a fourth location, in Bengaluru, from 17 to 19 November 2026.

Who attends embedded world

embedded world's visitors come mostly from automotive, electronics and industrial companies, and 44 percent travel from outside Germany. The FKM-certified 2026 show report counts 35,962 visitors from 86 countries. Of those, 20,067 came from Germany and 15,895 from abroad.

Visitors by industry segment
  • Automotive industry / electronics23%
  • Electronics / consumer electronics10%
  • Industrial controls8%
  • Telecommunication5%
  • Medical engineering5%
  • AI (Artificial Intelligence)4%
  • Distribution4%
  • Software / system house4%
  • Computers / PC peripherals3%
  • Display technology (hardware)3%

Extract from FKM-certified visitor registration. The report lists four more segments at 3 percent each (university, semiconductor production, IoT, IT).2026 · edge.sitecorecloud.io ↗

Visitors by origin

56%Germany

44%International

FKM-certified visitor registration. Top international countries were Italy, Austria, USA, France and Great Britain.2026 · edge.sitecorecloud.io ↗

Reasons for visiting
  • General market orientation37%
  • Inspiration for own products33%
  • Further education / extending knowledge28%
  • Experience / exchanging information27%
  • Industry trends and innovations27%
  • Networking27%
  • Finding solutions to specific challenges21%
  • Maintaining business contacts20%
  • Comparing suppliers and products20%
  • Initiating business contacts19%

Visitor survey according to FKM guidelines, multiple responses, extract.2026 · edge.sitecorecloud.io ↗

Exhibitors by origin
  • International890
  • Germany352

FKM-certified structural data, 1,242 exhibitors in total.2026 · edge.sitecorecloud.io ↗

The largest visitor segment, at 23 percent, is the one the report labels automotive industry and electronics. Electronics and consumer electronics followed at 10 percent, then industrial controls at 8 percent. Italy, Austria, the USA, France and the UK were the top five countries of origin after Germany.

In the 2026 visitor survey, 37 percent came for general market orientation and 33 percent for inspiration for their own products. Satisfaction was high, with 96 percent saying they were satisfied with their visit.

The organizer's 2027 exhibitor brochure names BMW, Deutsche Telekom, Nokia, Schaeffler, Audi, BSH Hausgeräte, Continental and Mercedes-Benz among its visitors. It doesn't say which edition they attended. The conference itself targets embedded system developers, specialists, and project and product managers.

Attendance and exhibitors by year

As the organizer reports them. What's counted varies between events, so compare with care.

EditionAttendanceExhibitors
2026

35,962Auditedvisitors from 86 countriesShow report figures marked FKM-certified. The closing press release rounds this to around 36,000.edge.sitecorecloud.io ↗

1,242 exhibitorsedge.sitecorecloud.io ↗

Companies exhibiting at embedded world 2027 and 2026

Several companies have already confirmed 2027 stands on their own sites. The 2026 names come from the organizer's 2026 exhibition guide, which lists every exhibitor's stand, or from the companies' own pages.

Sponsors (7)Bosch, Edge Impulse, Eurocircuits and 4 more
Partners (5)Bluetooth SIG, Eclipse Foundation, MIPI Alliance and 2 more
Exhibitors (25)Quectel, Beckhoff Automation, Fraunhofer IPMS and 22 more
Speakers' companies (2)Wind River, Heicon Global Engineering
Attending (8)BMW, Deutsche Telekom, Nokia and 5 more

The 2026 guide shows NXP Semiconductors, Texas Instruments and Microchip Technology in Hall 3A, and Infineon and STMicroelectronics in Hall 4A. Distributors exhibited too, including DigiKey and Mouser Electronics.

Open source groups had a visible presence. The Zephyr Project had a stand in Hall 4, and RISC-V International ran a pavilion in Hall 5.

Exhibitors at embedded world

embedded world had 1,242 exhibitors in 2026, and 890 of them came from outside Germany. They used 33,875 square meters of stand space in 63,200 square meters of gross exhibition space.

For 2027, Halls 1, 2, 3, 3A, 3C and 4A target hardware, systems and services. Hall 3C is new for 2027. Hall 4 focuses on software and tools, and Hall 5 mixes hardware with software and tools.

Companies apply through the online exhibitor application, and stands start at 9 square meters. Regular 2027 prices apply until 15 January 2027. They're EUR 383 per square meter for an in-line stand and EUR 481 for an island stand. Last-minute prices from 16 January 2027 rise to EUR 397 and EUR 498. We checked these prices in October 2026.

Every exhibitor also pays an AUMA fee of EUR 0.60 and a waste fee of EUR 6.40 per square meter. Marketing services add EUR 1,290.

Start-ups under five years old can book a start-up package for EUR 2,890 plus VAT. It rises to EUR 3,090 at last-minute rates and includes stand space, construction, marketing services and a pitch slot.

In the 2026 exhibitor survey, 94 percent said they reached their most important target groups. 93 percent expect follow-up business. For budgeting, see our guide to what it costs to exhibit at a trade show.

Sponsors and partners at embedded world

embedded world doesn't publish a sponsor list or a sponsorship prospectus. Its sales team handles exhibition and sponsoring inquiries, and the organizer says details on exclusive marketing will be available soon.

The 2026 Student Day had named sponsors. The start-up page lists Bosch, Edge Impulse, Eurocircuits, hema electronic, imac, Mouser Electronics, pls Development Tools and VDE YOUNG NET.

Community partners shape the conference. In 2026, partners such as the Eclipse Foundation, MIPI Alliance, Yocto Project, Zephyr Project and CAN in Automation organized dedicated sessions. The show report counts 15 international alliances as community partners.

Sponsors comparing tools for packages and deliverables can start with our list of event sponsorship software.

The event's tech

We couldn't identify a third-party registration platform on the event's website.

Which platforms run B2B event registration →

embedded world attendee list, exhibitor list and sponsor list

embedded world doesn't publish an attendee list. NürnbergMesse warns that emailed offers of visitor data are dubious and have no connection to it. The same page warns about fake invoices and says official directories come only from NürnbergMesse.

The official exhibitor search lists exhibitors and products with filters. The 2026 exhibition guide lists every 2026 exhibitor with stand numbers. There's no separate sponsor list.

Instead of attendee data, exhibitors get free access to the LeadSuccess app for lead retrieval. It scans visitor tickets on a phone or tablet. Exhibitors can also send visitors voucher codes through the exhibitor area.

For other ways to see who's going, read how to find who's attending an event and compare event intelligence platforms.

See who's attending Embedded World

Organizers don't publish attendee lists. These event intelligence platforms show which companies and roles are likely to attend and help you book meetings. How to find who's attending

Speakers at embedded world 2027

embedded world hasn't announced its 2027 speakers yet. The call for papers closed on 28 September 2026, and authors hear back in November. The organizer says the 2027 expert panel sessions will be published from mid-January. Bluetooth SIG says it'll run a special session at the 2027 conference, without naming speakers yet.

Embedded World hasn't announced its 2027 speakers yet. Below is who spoke at past editions.

The 2027 call covers topic areas from IoT and connectivity to edge AI and sustainable engineering. Talks get a 30-minute slot, must be in English and can't be promotional.

At the 2026 edition, Microchip COO Rich Simoncic gave the conference keynote, titled Learning from the Octopus. Conference chairman Prof. Dr.-Ing. Axel Sikora of Offenburg University opened the program.

Bosch Sensortec scheduled a keynote by its CEO Stefan Finkbeiner on MEMS sensors for 12 March 2026. Rohde & Schwarz listed a 2026 talk on Wi-Fi 8 by Jörg Köpp.

The organizer's 2027 call quotes 2026 contributors including Rob Woolley of Wind River and Danilo Pau of STMicroelectronics.

Who spoke at Embedded World 2026 (9)

Dates, venue and getting there

embedded world 2027 runs Tuesday 16 to Thursday 18 March 2027. Doors open 9 a.m. to 6 p.m. on the first two days and 9 a.m. to 5 p.m. on Thursday.

It's held at the NürnbergMesse exhibition center, Messezentrum 1, 90471 Nuremberg. From Nuremberg main station, the U1 underground reaches the exhibition center in eight minutes. Nuremberg airport connects to the site by public transport, taxi and car.

On-site parking costs EUR 14 a day. NürnbergMesse also runs its own hotel booking service with partner hotels.

The brand also runs abroad. There's a separate embedded world North America in California, and embedded world India launches in Bengaluru on 17 to 19 November 2026. In Germany, electronica 2026 covers the wider electronics industry.

embedded world 2027 hall planSimplified, not to scale. Based on the official plan ↗
NCC Mitte (services) · Conferences (NCC Ost) and servicesNCC Ost (conferences) · Conferences (NCC Ost) and servicesHall 1 · Hardware, systems, distribution, servicesHall 1 (electronic displays Area) · electronic displays AreaHall 2 · Hardware, systems, distribution, servicesHall 2 (electronic displays Area) · electronic displays AreaHall 2 (start-up@embedded world) · start-up@embedded worldHall 2 (embedded vision Area) · embedded vision AreaHall 3C · Hardware, systems, distribution, servicesHall 3 · Hardware, systems, distribution, servicesHall 3 (M2M Area) · M2M AreaHall 5 · Hardware, systems, distribution, servicesHall 5 (tools and application software) · Tools and application software, systems, distribution, servicesHall 5 (safety & security Area) · safety & security AreaHall 4 · Tools and application software, systems, distribution, servicesHall 4 (IC&IP Design Area) · IC&IP Design AreaHall 4A · Hardware, systems, distribution, servicesHall 3A · Hardware, systems, distribution, servicesNCC MitteNCC Ost123C3544A3AEntrance Mitte →Entrance 3C →Entrance 3A ↑← Entrance Ost
  • Hardware, systems, distribution, services · Halls 1, 2, 3, 3A, 3C, 4A, 5
  • Tools and application software, systems, distribution, services · Halls 4, 5
  • electronic displays Area · Halls 1, 2
  • embedded vision Area · Hall 2
  • M2M Area · Hall 3
  • safety & security Area · Hall 5
  • IC&IP Design Area · Hall 4
  • start-up@embedded world · Hall 2
  • Conferences (NCC Ost) and services

Halls 1 and 2 hold the electronic displays Area. Hall 2 also holds the embedded vision Area and start-up@embedded world. Halls 4 and 5 share tools and application software.

Tickets and registration for embedded world 2027

An exhibition ticket costs EUR 28 including VAT and covers all three days. We checked the price in October 2026.

Tickets are sold only online through the official ticket shop. They can't be bought or redeemed on site.

E-tickets are personal and non-transferable. Each one includes a public transport ticket for the Nuremberg and Fürth fare zones on show days.

The embedded world Conference and the electronic displays Conference need a separate ticket.

embedded world is a trade fair open only to people over 18. Visitors don't have to prove they work in the industry, but children and babies aren't admitted.

History of embedded world

embedded world started in Nuremberg in 2003 with two halls and around 350 exhibitors. By 2026 it had more than 1,200 exhibitors and 36,000 visitors.

The 2026 show was the 24th edition, and visitor numbers grew more than 13 percent on the previous year.

The brand now runs abroad. The 2027 call for papers notes that embedded world North America is in its third year, and embedded world India starts in November 2026.

Componeers GmbH runs the conference, and Prof. Dr.-Ing. Axel Sikora chairs it and heads the embedded award jury. In 2026 Prof. Dr. Jan Bauer took over as chair of the electronic displays Conference.

Frequently asked questions

When is Embedded World 2027?
Embedded World 2027 runs 16 to 18 March 2027 at the exhibition center in Nuremberg. Hours are 9 a.m. to 6 p.m. on Tuesday and Wednesday and 9 a.m. to 5 p.m. on Thursday.
Where is Embedded World held?
Embedded World takes place in Nuremberg, Germany, at Exhibition Centre Nuremberg. It's held every year.
How many people attend Embedded World?
The organizer reported 35,962 visitors from 86 countries for the 2026 edition, an audited figure. Organizers count differently, so compare figures with care.
How many exhibitors are at Embedded World?
The organizer reported 1,242 exhibitors for the 2026 edition.
Who organizes Embedded World?
Embedded World is organized by NürnbergMesse.
What is embedded world?
embedded world is NürnbergMesse's annual trade fair and conference for embedded systems in Nuremberg. It covers hardware, software, tools, displays and services, and the 2027 edition runs 16 to 18 March.
How many people attended embedded world 2026?
embedded world 2026 had 35,962 visitors from 86 countries in FKM-certified figures, and 44 percent came from abroad. The organizer's closing release rounds this to around 36,000.
Who attends embedded world?
Visitors come mostly from automotive, electronics, industrial controls, telecom and medical engineering companies. In 2026 the largest segment, at 23 percent, was automotive industry and electronics.
Is there an embedded world exhibitor list?
Yes. The organizer's exhibitor search lists exhibitors and products, and the 2026 exhibition guide lists every 2026 exhibitor with stand numbers.
Can you buy the embedded world attendee list?
No official attendee list is published. NürnbergMesse warns that emailed offers of visitor data are dubious and have no connection to it.
How much are embedded world tickets?
An exhibition ticket costs EUR 28 for all three days, including VAT, as checked in October 2026. Tickets are sold only online, and the two conferences need a separate ticket.
Can you get free tickets for embedded world?
Exhibitors can send visitors voucher codes, which are redeemed in the online ticket shop before the show. Vouchers can't be redeemed on site.
How much does it cost to exhibit at embedded world?
Regular 2027 stand prices run from EUR 383 per square meter for an in-line stand to EUR 481 for an island stand. The minimum stand is 9 square meters, and fees for AUMA, waste and marketing services come on top.
Who's speaking at embedded world 2027?
embedded world hasn't announced its 2027 speakers yet. The call for papers closed on 28 September 2026. At the 2026 edition, Microchip COO Rich Simoncic gave the conference keynote.
Where is embedded world North America 2027?
embedded world North America is a separate event. Its site lists Long Beach Convention Center for 12 to 14 October 2027. See our embedded world North America 2027 page.